| |
|
| Chinese/Engilsh |
|
|
|
 |
Name
|
AN-CHEN LEE |
| Office Address |
Department of Mechanical Engineering,
National Chiao Tung University
No 1001, Ta Hsueh Road, Hsinchu, Taiwan 300, ROC |
| Tel |
|Rm. 433,Eng. V
886-3-571-2121
ext 55106 |
| An-Chen Lee's Laboratory |
Rm. 243, Eng.V
886-3-5712121
ext.55138 |
| FAX |
886-3-5720634 |
E-mail |
aclee@mail.nctu.edu.tw |
|
|
|
|
An-Chen Lee (M’04) was born in Chiayi, Taiwan in 1956. He received the B.S. and M.S. degrees in Power Mechanical Engineering from National Tsing-Hua University, Hsinchu, Taiwan. and the Ph.D. degree in 1986 from University of Wisconsin-Madison in Mechanical Engineering, USA. From 1986 to 1990, he was an Associate Professor in the Department of Mechanical Engineering, National Chiao Tung University, Hsinchu, Taiwan.
He is currently a Professor in the Department of Mechanical Engineering, National Chiao Tung University. He also currently holds the Vice Dean and the Degree Program Chairman of the College of Engineering, National Chiao Tung University. At National Chiao Tung University, he teaches courses in automatic controls and digital controls.
His current research interests are CNC machine tool control technology, Magnetic bearing technology, Rotor dynamic and control, and Production automation control. Prof. Lee served as an Editorial Board member of International Journal of Precision Engineering and Manufacturing, Chinese Society of Mechanical Engineers, and Journal of Applied Mechanics and Engineering.
He is the recipient of Chinese Society of Engineers Engineering Paper Award (1989), Excellent Research Award (1991-1992) of the National Science Council of Taiwan, Distinguished Research Award (1993-1994, 1995-1996, and 1997-1998) of the National Science Council of Taiwan, Distinguished Engineering Professor Award (1995) of Chinese Society of Mechanical Engineers, and Distinguished Engineering Professor Award (2001) of the Chinese Institute of Engineers. He is a Research Fellow (1999-2004) of the National Science Council of Taiwan and holds the Chair Professor (2004~) of National Chiao Tung University. |
|
|
|
|
| Organization |
Title |
| National Formosa University |
National Formosa University Vice President |
| National Chiao Tung University |
National Chiao Tung University College of Engineering Chair Professor |
| National Chiao Tung University |
National Chiao Tung University College of Engineering Vice Dean |
| National Chiao Tung University |
National Chiao Tung University Degree Program,College of Engineering Chairman |
| National Chiao Tung University |
National Chiao Tung University Department of Mechanical Engineering professor |
| National Chiao Tung University |
National Chiao Tung University Manufacturing Automation Research Center director |
| National Chiao Tung University |
National Chiao Tung University Department of Mechanical Engineering Associate Professor |
|
|
|
|
Degree
|
School |
| Bachelor of Engineering |
Power Mechanical Engineering Department,
National Tsing Hua University |
| Master of Engineering |
Power Mechanical Engineering Department,
National Tsing Hua University |
| Doctor of Philosophy |
Graduate School of Mechanical Engineering, University of Wisconsin-Madison,USA |
|
|
|
|
| Item |
| CNC machine tool control technology |
| Magnetic bearing techno |
| Rotor dynamic and control |
| Production automation control |
|
|
|
|
| Item |
| CNC controller design |
| Object-oriented controller design for cluster tool |
| Semiconductor Equipment development for semiconductor package and TFT-LCD |
| R&D for turbo molecular vacuum pump |
|
|
|
|
| NO. |
Item |
| 1 |
1991-1992 Excellent Research Award, National Science Committee |
2 |
1992 Invited symposium in the "Advances in Control and Dynamic Systems" published by Academic Press |
| 3 |
1993-present, a member of Editorial Board Chinese society of Mechanical Engineers |
| 4 |
1993-present a member of Editorial Board, Journal of Applied Mechanics and Engineering |
| 5 |
1993-1994 Distinguished Research Award, National Science Committee |
| 6 |
1993-1994 a board of derectors, Chinese Institute of Automation Engineers |
| 7 |
1995 Distinguished Engineering Professor Award, Chinese Society of Mechanical Engineers |
| 8 |
1995-1996 Distinguished Research Award, National Science Committee |
| 9 |
1997-1998 Distinguished Research Award, National Science Committee |
| 10 |
1997 Listed in 15th Edition, Who's Who in the World |
| 11 |
1997-present Member of Fellowship Committee, National Science Committee |
| 12 |
1999-present Research Fellow, National Science Committee |
| 13 |
1999 Listed in "Outstanding People of the 20th Century" published by International Biographical Centre Cambridge, England |
| 14 |
1999 Listed in "Outstanding People of the 20th Century" |
| 15 |
2001 Distinguished Engineering Professor Award, Chinese Society of Mechanical Engineers |
| 16 |
2002-present Visiting Professorship, Huazhong University of Science and Technology |
| 17 |
Member of Referee Committee for Technology Development Projects and New Product Development Project, Ministry of Economic Affairs ROC |
| 18 |
Member of Referee Committee for technology colleges and universities projects,technological and Vocational Education Department, Ministry of Education ROC
|
| 19 |
Member of Reviewers for international Journals |
| 20 |
Invited lecture in the 11th Conference held by the Chinese Society of Mechanical Engineers |
| 21 |
2004-present a member of Editorial Board, International Journal of Precision Engineering and Manufacturing |
| 22 |
2004-2007 Chair Professor, National Chiao Tung University |
| 23 |
2005 Research Fellow Award, National Science Committee |
| 24 |
2007-2010 Chair Professor, National Formosa University |
| 24 |
2010-2013 Chair Professor, National Chiao Tung University |
| 25 |
2005 Research Fellow Award, National Science Committee |
| 26 |
2010 Taipei International Invention Show & Technomart Award of meri |
| 27 |
2010 Invention & New Product Exposition Award of merit |
|
|
Referred Paper ( since 1990~ ) |
|
|
| NO. |
Item |
| 1 |
A. C. Lee and J. H. Chen, 1990, "Optimum Extraction of Structural Characteristics from Response Measurements," AIAA J. of Guidance, Control, and Dynamics, Vol. 13, No. 4, pp. 675-683. |
| 2 |
A. C. Lee and J. S. Chou, 1990, "Computer Classification of the PCG Waveform," Int. J. of System Sciences, Vol. 21, No. 3, pp. 593-609 |
| 3 |
A. C. Lee, 1990, "Minimum Variance Controller for a Class of Nonlinear Systems," Int. J. of System Sciences, Vol. 21, No. 11, pp. 2091-2101. |
| 4 |
A. C. Lee, D. P. Chen, and C. L. Lin, 1990, "A CAD/CAM System from 3D Coordinate Measuring Data," Int. J. of Production Research, Vol. 28, No. 12, pp. 2353-2371.(NSC 76-0611-E009-02) |
| 5 |
A. C. Lee, C. S. Liu, and S. T. Chiang, 1991, "Analysis of Chatter Vibration in a Cutter-Workpiece System," Int. J. of Machine Tools & Manufacture, Vol. 31, No. 2, pp. 221-234. (NSC 76-0611-E009-02) |
| 6 |
A. C. Lee, Y. Kang and S. L. Liu, 1991, "A Modified Transfer Matrix Method for Linear Rotor-Bearing Systems," ASME Journal of Applied Mechanics, Vol. 58, pp. 776-783(NSC 81-0401 -E009-08) |
| 7 |
A. C. Lee, and C. S. Liu, 1991, "Analysis of Chatter Vibration End Milling Processes," Int. J. of Machine Tools & Manufacture, Vol. 31, No. 4, pp. 471-479.(NSC 76-0611 -E009-02) |
| 8 |
A. C. Lee, S. T. Chiang, and C. S. Liu, 1991, "Analysis of Cutting Forces and Shape Errors End Milling," Journal of CSME, Vol. 12, No. 4, pp. 412-426.(NSC 76-0611-E009-02) |
| 9 |
A. C. Lee, Y. Kang, K. L. Tsai, K. M. Hsiao, 1992, "Transient Analysis of an Asymmetric Rotor-Bearing System During Acceleration," ASME Journal of Engineering for Industry, Vol. 114, November, pp. 465-475.(NSC 81-0401-E009-08) |
| 10 |
Y. Kang, Y. P. Shih, A. C. Lee, 1992, "Investigation on the Steady-State Responses of Asymmetric Rotors," ASME Journal of Vibration and Acoustics, Vol. 114, pp. 194-208.(NSC 81-0401-E009-08) |
| 11 |
A. C. Lee, and C. H. Chen, 1992, "Optimal Sampling in the Identification of Randomly Excited Structural System," J. of Mechanical Systems and Signal Analysis, Vol. 6, No. 4, pp. 329-344. |
| 12 |
A. C. Lee and S. T. Chen, 1992, "Optimal Vibration Control for a Flexible Rotor with Gyroscopic Effects," Int. J. of the Japan Society of Mechanical Engineers, Series III, Vol. 35, No. 3, pp. 446-455.(NSC 81-0401-E009-08) |
| 13 |
Y. S. Shieh and A. C. Lee, 1992, "A Novel Control Algorithm for Rapid and Precise Positioning," Int. J. of the Japan Society of Mechanical Engineers, Series III, Vol. 35, No. 4, pp. 560-568. |
| 14 |
Y. F. Fan, S. T. Chen, and A. C. Lee, 1992, "Active Control of an Asymmetrical Rigid Rotor Supported by Magnetic Bearings," J. of Franklin Institute, Vol. 329, No. 6, pp. 1153-1178.(NSC 81-0401-E009-08) |
| 15 |
S. T. Chen and A. C. Lee, 1993, "Decoupling Vibration Control of a Flexible Rotor System with Symmetric Mass and Stiffness Properties," J. of Systems and Control Engineering, Vol. 207, pp. 9-14.(NSC 82-0401-E009-405) |
| 16 |
S. T. Chen and A. C. Lee, 1993, "Vibration and Robust Control of Symmetric Flexible Systems," AIAA J. of Guidance, Control and Dynamics, Vol. 16, No. 4, pp. 677-685.(NSC 82-0401- E009-405) |
| 17 |
A. C. Lee, Y. P. Shih and Y. Kang, 1993, "The Analysis of Linear Rotor-Bearing Systems -- A General Transfer Matrix Method," ASME Journal of Vibration and Acoustics, Vol. 115, Oct., pp. 490-497.(NSC 81-0401-E009-08) |
| 18 |
A. C. Lee, Y. Kang, and S. L. Liu, 1993, "Steady-State Analysis of a Rotor Mounted on Nonlinear Bearings by the Transfer Matrix Method," Int. Journal of Mechanical Sciences, Vol. 35, No. 6, pp. 479-490.(NSC 81-0401-E009-08) |
| 19 |
S. T. Chen, Y. H. Fan, and A. C. Lee, 1994, "An Effective Active Damping Design for Suppression of Vibration in Flexible Systems via Dislocated Sensor/Actuator Positioning," Int. J. of the Japan Society of Mechanical Engineers, Series III, Vol. 37, No. 2, pp. 252-259.(NSC 82-0401-E009-405) |
| 20 |
A. C. Lee, F. Z. Hsiao, and D. Ko, 1994, "Performance Limits of Permanent Magnet Biased Magnetic Bearings," Int. J. of the Japan Society of Mechanical Engineers, Series III, Vol. 37, No. 3, pp. 783-794.(NSC 80-0401-E009-04) |
| 21 |
A. C. Lee, F. Z. Hsiao, and D. Ko, 1994, "Analysis and Testing of a Magnetic Bearing with Permanent Magnets for Bias," Int. J. of the Japan Society of Mechanical Engineering, Series III, Vol. 37, No. 3, pp. 774-782.(NSC 80-0401-E009-04) |
| 22 |
A. C. Lee, and S. T. Chen, 1994, "Collocated Sensor/Actuator Positioning and feedback Design in the Control of Flexible Systems," ASME Journal of Vibration and Acoustics, Vol. 116, April, pp. 146-154.(NSC 82-0401-E009-405)
|
| 23 |
K. M. Hsiao, R. T. Yang, and A. C. Lee, 1994, "A Consistent Finite Element Formulation for Nonlinear Dynamic Analysis of Planar Beam," Int. J. for Numerical Method in Engineering, Vol. 37, p.p. 75-89. |
| 24 |
Y. Kang, A. C. Lee, and Y. P. Shih, 1994, "A Modified Transfer Matrix Method for Asymmetric Rotor-Bearing Systems," ASME Journal of Vibration and Acoustics, Vol. 116, No. 3, July, pp. 309-317.(NSC 80-0401-E009-04) |
| 25 |
Y. N. Yang, W. H. Chieng, and A. C. Lee, 1994, "Design for Manufacturing Elastic Pivots with Special Reference to Manufacturing Error," Int. J. Machine Tool and Manufacture, Vol. 34, No. 8, pp. 1103-1118. |
| 26 |
F. Z. Hsiao and A. C. Lee, 1994, "An Investigation of the Characteristics of Electromagnetic Bearings Using the Finite Element Method," ASME Journal of Tribology, Vol. 116, October, pp. 710-719.(NSC 80-0401-E009-04) |
| 27 |
Y. H. Fan, and A. C. Lee, 1995, "Decentralized Control of a Rotor System Supported by Magnetic Bearings," Int. J. of Machine Tools and Manufacture, Vol. 35, No. 3, pp. 445-458.(NSC 80-0401-E009-04) |
| 28 |
Y. S. Shieh, and A. C. Lee, 1995, "A New Sampled-Data Drive for CNC Machine Tools," Int. J. of Machine Tools and Manufacture, Vol. 35, No. 6, pp. 885-902.(NSC 83-0422-E009-063) |
| 29 |
S. T. Chiang, C. M. Tsai, and A. C. Lee, 1995, "Analysis of Cutting Forces in Ball End Milling," Journal of Materials Processing Technology, Vol. 47, pp. 231-249. (NSC 82-0422-E009-072) |
| 30 |
S. T. Chiang, D. I. Liu, and A. C. Lee, 1995, "Adaptive Control Optimization End Milling Using Neural Networks," Int. J. of Machine Tools and Manufacture, Vol. 34, No. 5, pp. 637-660.(NSC 83-0422-E009-063) |
| 31 |
J. H. Chen, and A. C. Lee, 1995, "Estimation of Linearized Dynamic Characteristics of Bearings Using Synchronous Response," Int. J. of Mechanical Sciences, Vol. 37, No. 2, pp. 197-219.(NSC 80-0401-E009-04) |
| 32 |
Y. N. Yang, W. H. Chieng, and A. C. Lee, 1996, "The Joint Displacement Method for Multi-Loop Kinematics Analysis," JSME International Journal, Series III, Vol. 38, No. 4, pp. 790-797. |
| 33 |
P. P. Sheu, W. H. Chieng, and A. C. Lee, 1996, "Modeling and Analysis of the Intermediate Shaft Between Two Universal Joints," ASME Journal of Vibration and Acoustics, Vol. 118, January, pp. 88-99.(NSC 80-0401-E009-04) |
| 34 |
S. L. Jeng, W. H. Chieng, and A. C. Lee, 1996, "Modeling and Diagnosis of the Motion Error of Multi-axis Machine Based on DBB Measurement," ASME Journal of Dynamic Systems, Measurement, and Control, September Vol. 118, pp. 531-539. |
| 35 |
F. Z. Hsiao and A. C. Lee, 1996 "Optimum Design of a Magnetic Bearing - Controlled Rotor System," Journal of Applied Mechanics and Engineering, Vol. 1, No. 2, pp. 263-291. |
| 36 |
F. Z. Hsiao, J. G. Fan, W. H. Chieng, and A. C. Lee, 1996 "Optimum Magnetic Bearing Design Considering Performance Limitations," JSME International Journal, Series III, Vol. 39, No. 3, pp. 586-596. |
| 37 |
A. C. Lee, and Y. P. Shih, 1996 "Identification of the Unbalance Distribution and Dynamic Characteristics of Bearings in Flexible Rotors," Journal of Mechanical Engineering Science, Vol. 210, pp. 409- 432. |
| 38 |
H. K. Lee, S. T. Chen, and A. C. Lee, 1996 "Optimal Control of Vibration Suppression in Flexible Systems via Dislocated Sensor/Actuator Positioning," J. of Franklin Institute, Vol. 333, No. 5, pp. 789-802. |
| 39 |
Y. S. Shieh, A. C. Lee, and C. S. Chen, 1996"Cross-Coupled Biaxial Step Control for CNC EDM," Int. J. of Machine Tools and Manufacture, Vol. 36, No. 12, pp. 1363-1383. |
| 40 |
Y. H. Fan, F. Z. Hsiao, and A. C. Lee, 1997 "Design of a Permanent/Electromagnetic Bearing-Controlled Rotor System," J. of Franklin Institute, Vol. 334(B), No.3, pp. 337-356. |
| 41 |
Y. P. Shih, and A. C. Lee, 1997 "Identification of the Unbalance Distribution in Flexible Rotors," Int. Journal of Mechanical Science, Vol.39, No.7, pp. 841-857. |
| 42 |
J. H. Chen, and A. C. Lee, 1997 "Identification of Linearized Dynamic Characteristics of Rolling Element Bearings", ASME Journal of Vibration and Acoustics, Vol. 119, pp. 60-69.(NSC 80-0401-E009-04) |
| 43 |
H. K. Lee, S. T. Chen and A. C. Lee, 1997 “Asymptotic Stability Analysis for Collocated Direct Output Feedback Control of Flexible Systems,” JSME International Journal, Series III, Vol. 40, No. 4, pp. 709-716. |
| 44 |
Y. T. Shih, A. C. Lee, and J. H. Chen, 1998 "Sensor-Actuator Placement for Modal Identification," J. of Mechanical Systems and Signal Processing, 12(5), pp. 641-659. |
| 45 |
C. S. Chen and A. C Lee, 1998 "Design of Acceleration/Deceleration Profiles in Motion Control Based on Digital FIR Filters" Int. J. of Machine Tools and Manufacture, Vol. 38, pp. 799-825. |
| 46 |
C. S. Chen and A. C Lee, 1999 "New Direct Velocity and Acceleration Feedforward Tracking Control in a Retrofitted Milling Machine" Int. J. of Japan Soc. Prec. Eng., Vol. 33, No. 3, pp. 178-184. |
|
|
|
|
| NO. |
Item |
| 1 |
"A CAD/CAM System from 3D Coordinate Measuring Data", The First International Conference on Automation Technology, Taipei, Taiwan, R.O.C., July 4-6, 1990 (with D. P. Chen and C. L. Lin). |
| 2 |
"Analysis of Cutting Forces and Shape Errors in End Milling", The first International Conference on Automation Technology, Taipei, Taiwan, R.O.C., July 4-6, 1990 (with S. T. Chang and C. S. Liu). |
| 3 |
"On the Design of Active Magnetic Bearing Systems," The 18th Seminar on Science and Technology, Symposium for Mechanical System Design, Feb. 24-25, Tokyo, Japan, 1992 (with Dennil Ko and Foam-Zone Hsiao). |
| 4 |
"Actuators/Sensors Positioning and Vibration Measure in the Control of Flexible System," The 1st Applied Mechanics Conference on Technology Development, Chung Shan Institute of Science and Technology, August 13-14, 1992 (with S. T. Chen). |
| 5 |
"Adaptive Control Optimization in End Milling Using Neural Networks," SINO-German Joint Symposium on Precision and High Speed Manufacturing Technology, Taipei, Oct. 4-5, 1993 (with S. T. Chiang, and D. I. Liu). |
| 6 |
"Optimum Design of the Magnetic Bearing-controlled Rotor System," Fourth International Symposium on Magnetic Bearings, Zurich, Swiss, August 23-26, pp. 139-144, 1994 (with F. Z. Hsiao). |
| 7 |
"Decentralized PID Control of Magnetic Bearings in a Rotor System," Fifth International Symposium on Magnetic Bearings, Kanazawa, Japan, August 28-30, pp. 13-18, 1996 (with Y. H. Fan). |
| 8 |
"Path Planning for CNC Contouring Around a Corner," Sino-German Joint Symposium on High-speed and High Precision Machining, Tainan, Taiwan, March, 1999 (with C.S. Chen, and Y.T. Shih). (NSC 88-2212-E009-033) |
| 9 |
"A New Structure of Cross-Coupling Control for Dual-axis Motion," The Sixth International Conference on Automation Technology (AUTOMATION 2000), Taipei, Taiwan, May, 2000 (with Y.T. Shih, and C.S. Chen) |
|
|
|
|
